Product Use

all pad printing field
Technical Parameter
Item number DY5035-5
A: white color or as customer color B: rust color or as customer color
Proportion (g/cm3


Hardness( shore A)


Tensile strength(mpa)


Elongation (%)


Operating time
30 minutes or as customer need
Cured time
room temperature (25℃) for 6~8 hours; Heating (40℃) for 2 hours

Product Description
The product is a two - component additive liquid silicone rubber, which can be cured at room temperature or by heating
Product Features
1. Environmental protection, non-toxic, solvent resistance, high temperature resistance
2. Fine colloid, good resilience, many times of pad printing, no impurities, no particles
3. Low viscosity, easy to bubble, clear print pattern
Usage Method
1. Use ratio: A:B=10:1(weight ratio)
2. Take agent A, add A certain amount of agent B, mix it evenly, remove the bubbles, and pour it into the mold.
3. Curing mode: room temperature (25℃) for 6~8 hours; Heating (40℃) for 2 hours
Quality Guarantee Period
1. Store in a cool, dry and ventilated place.
2. Ambient temperature is less than 37℃.
Contact Us
  • 86-13701197193
  • 18510136855@sina.cn
  • 50m North of Jingzhou Road, Dazi Caowu Village, Yancun Town, Fangshan District, Beijing
  • Asking for Samples

    ©2020 Smooth-On, Inc. All rights reserved. Use of this website is subject to our terms of use.